Sanitary water collector HERZ Dn20, 2 outlets, 2853002
Number of outputs: 2
Body: Forged brass to UBA / 4MS listings, CW617N
All shut-off valves are located in one place - easier control for the consumer.
Self-sealing central connection using rubber O-rings.
Easy access to handwheels of shut-off valves - shut-off valves with a 20 ° inclination angle.
Fewer fittings - less possibility of leakage - direct connection to point of consumption - sink, bathtub, washing machine, etc.
Reduces installation time by 30% - 40% due to fewer required connection fittings.
During installation, each outlet can be marked thanks to the marking stickers included in the set.
Collectors can be installed in a convenient location where they can be freely accessed, which means less obstruction during construction and easy maintenance.
Max. working pressure: 10 bar
Max. working temperature: 110 °C
Liquids: Sanitary or heating water
If the collector is used in heating systems, the heating water must meet the quality of ÖNORM H5195 or VDI-Standard 2035. It is allowed to use ethylene glycol or propylene glycol in a mixture ratio of 25-50%. Please refer to the manufacturer's documentation when using ethylene glycol products for frost and corrosion protection. Please note that EPDM seals will be affected by mineral oil lubricants and thus may damage the EPDM seals in valves using EPDM seals. HERZ - Sanitary water collectors are not suitable for use in aggressive environments (for example: acids, alkalis, flammable and explosive gases;) because it can destroy the sealing components.
Country of manufacture : Slovenia (HERZ)