Gas water heater FERROLI KONA 17 0DK97IAA
Power kW: 5.25
Heat capacity kW: 5,6 - 25,9
Efficiency % 85 85 LPG burner nozzles Number x Ø 10 x 0.74
LPG gas supply pressure mbar: 37
LPG burner pressure Min. Max. mbar: 4.3 - 20.5
LPG gas flow rate Min. Max. m3 /h: 0.31 1.79
CO2 Min Max %: 1.9 - 6.5
NOx emission class: 6 (< 56 mg/kWh)
Maximum domestic hot water temperature: °C 65
Working pressure Min. Max. bar: 0.20 - 10
Domestic hot water capacity Δt 25°C Δt 30°C l/min : 12 10
IP: IPX4D
Power supply: 1/N/PE ~230 V / 50 Hz
Energy consumption W : 34
Sound power level dB (A) : 54
Weight of the heater without water kg: 13.7
Weight of the heater without water (with packaging) kg: 15.1
Dimensions L x H x D mm: 370 x 525 x 190
Flue gas connection diameter Ø mm: 60/100
The gas water heater KONA is a small device used to prepare hot water. It works on the principle of flow and does not require a lot of space, as is the case with other heaters. KONA has a closed combustion chamber and a modulated exhaust fan - its operation is independent of the air in the room. The device has modern technical solutions, which means quiet operation, easy operation, low exhaust gas emissions and reliability. Low investment costs make KONA an excellent choice for economical hot water preparation in new and modernized buildings.
Advantages:
- Very wide modulation range up to 1:6
- Energy efficiency class A
- Closed combustion chamber with modulated exhaust fan (operation independent of the air in the room)
- Modulating burner with ionization flame control
- Low exhaust gas emissions thanks to the burner design that keeps the flame temperature at a very low level (NOx emissions below 56 mg/kWh).
- Very quiet operation at 54 db(A)
- The heat exchanger is completely made of copper
- Control module with electronic ignition and electronic system combustion process monitoring (PCB)
- Touch control panel using CAPSENSE technology
- ECO mode with output power limited to 80% of the maximum value while maintaining a comfortable water temperature
- Equipped with: outlet hot water temperature sensor, temperature sensor and cold water flow sensor at the inlet, safety valve 85°C, modulated gas valve
- Compact design with small size, easy operation and installation
- Easy access to components, easy maintenance.